PRV Audio 4MR60-4 MR Series 4" 30W RMS (60W Peak Power Handling) 4 Ohm, Midrange Car Speaker (Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Compact Build, Clean Midrange Upgrade
If you’re looking to level up your system without taking up much space, the PRV Audio 4MR60-4 Midrange Car Speaker is built to deliver a clean and noticeable upgrade. Its compact 4 inch design makes it easy to fit into doors, pods, or tight custom setups where bigger speakers just won’t work. Even in small spaces, it brings a clear and balanced sound that immediately improves your overall audio experience.
Natural Sound With Tight Control and Detail
This midrange is designed for balanced accuracy, using a woven fiberglass cone that keeps distortion low and sound reproduction precise even under pressure. With 90 dB sensitivity and 60W program power handling, it delivers efficient output that keeps vocals and instruments sounding clean without needing heavy amplifier power. The optimized motor structure ensures stable performance, while the 4 ohm compatibility makes it easy to match with a wide range of audio systems.
Smooth Frequency Range Built for Real Listening
Covering a wide 90 Hz to 15,000 Hz frequency range, this speaker delivers smooth midrange performance with natural tonal balance that works great for daily driving or full system builds. The 0.78 inch Kapton voice coil helps maintain thermal stability, so it stays reliable during long listening sessions. With 30W RMS power handling and 2.87 mm Xmax excursion, it keeps cone movement controlled for tighter low mids and cleaner output. It’s a simple upgrade that brings your entire sound system to life without overcomplicating your setup.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 4MR60-4 sound distorted at high volume?
Distortion is usually caused by amplifier clipping, incorrect gain settings, or using the speaker below the recommended crossover frequency. Setting a proper high pass filter and supplying clean power will help maintain clear sound.
- • Can I use the 4MR60-4 without a tweeter?
Yes. The 4MR60-4 offers a wide frequency response that allows it to reproduce vocals and upper frequencies effectively. However, adding a dedicated tweeter can provide more detail and brightness for larger systems.
- • Why is my 4MR60-4 not producing enough bass?
The 4MR60-4 is designed primarily for midrange and vocal reproduction. It is not intended to deliver deep bass, so pairing it with a dedicated midbass driver or subwoofer will produce a fuller sound.
- • Will the 4MR60-4 fit in factory dashboard or door locations?
Many users install the speaker in dashboards, doors, kick panels, and custom enclosures. Before purchasing, compare the speaker's mounting dimensions with your available installation space.
- • My speaker sounds weak after installation. What should I check?
Check that the speaker polarity is correct, verify all wiring connections, and confirm your amplifier or head unit crossover settings. Incorrect wiring or filtering can significantly reduce output.
- • Can I power the 4MR60-4 directly from my factory head unit?
The speaker will produce sound from many factory radios, but it performs much better with an external amplifier that provides clean and consistent power.
- • Why does my speaker get hot during extended listening?
A warm voice coil is normal during heavy use. Excessive heat usually indicates overpowering, clipped signals, or playing below the recommended crossover frequency for long periods.
- • Is the 4MR60-4 sold individually or as a pair?
The PRV Audio 4MR60-4 is typically sold as a single speaker. Purchase two speakers if you are building a stereo system.
- • Can I use the 4MR60-4 in a motorcycle or powersports audio system?
Yes. Many enthusiasts install it in motorcycles, UTVs, and other custom audio builds where a compact speaker with strong vocal output is needed. Be sure to protect it from direct water exposure if your application requires weather resistance.
- • Why do vocals sound harsh on my 4MR60-4?
Harsh vocals are commonly caused by equalizer settings with excessive treble, improper crossover points, or amplifier distortion. Fine tuning your DSP or EQ and ensuring clean amplifier output will produce smoother, more natural vocals.
- Diameter : 4 Inch
- Sensitivity : 90 dB
- Impedance : 4 Ohm
- Frequency Response : 90-15000 Hz
- Peak Power Handling : 60 Watts
- RMS Power Handling : 30 Watts
Features:
- Balanced Midrange Accuracy: 90 dB sensitivity with 60W program power delivers clean, efficient output for clear vocals and instrument reproduction in compact audio systems.
- Extended Frequency Response: 90 Hz to 15,000 Hz range provides smooth midrange performance with natural tonal balance for full-range and transition applications.
- Compact Full Range Design: 4 inch driver size allows flexible installation in tight spaces such as car doors, pods, and compact line array systems.
- Woven Fiber Glass Cone Construction: Rigid cone material improves durability and reduces distortion for more accurate sound reproduction under load.
- High Excursion Capability: 2.87 mm Xmax supports controlled cone movement for improved low mid performance and reduced breakup at higher output levels.
- Optimized Motor Structure: Strong magnetic system delivers stable performance and efficient energy conversion for consistent sound output.
- Kapton Voice Coil Assembly: 0.78 inch voice coil with Kapton former ensures thermal stability and reliable performance during extended operation.
- High Power Handling Design: 30W RMS and 60W program power support dependable daily use in mobile, home, and pro audio applications.
- 4 Ohm System Compatibility: Standard impedance enables easy integration with a wide range of amplifiers and multi-driver configurations.
Specifications:
- Nominal Diameter: 4″ (101.6 mm)
- Nominal Impedance: 4 Ohms
- Rated AES Power Handling (RMS): 30 Watts
- Program Power: 60 Watts
- Sensitivity (2.00V at 1m): 90 dB
- Recommended High-Pass Crossover: 190 Hz, 12dB per octave
- Frequency Response (-10 dB): 90 – 15,000 Hz
- Voice Coil Diameter: 0.78″ (20 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 7.5 mm
- Former Material: Kapton
- Magnetic Gap Depth: 3.5 mm
- Frame Material: Stamped Steel
- UPC: 810075524673
- Weight: 2
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
