PRV D3220Ti-Nd Series 2" 300W RMS (600W Peak Power Handling) 8 Ohm, Exit Neodymium Titanium Compression Driver (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 2" D3 Series Exit Neodymium Titanium Compression Driver
- • Owner's Manual
Sharp Output That Instantly Grabs Attention
The PRV Audio D3220Ti-Nd is built for systems that need highs to stand out with authority. With 110 dB sensitivity, it delivers strong and detailed projection that easily cuts through bass heavy setups. Whether you are running a daily system or a full competition build, this driver brings energy and clarity that makes every track sound alive.
Crisp Detail That Holds Up Under Pressure
This compression driver is all about precision and durability. The titanium diaphragm produces clean, accurate highs that stay consistent even at high volume levels. With a wide frequency range from 1,200 Hz to 19,000 Hz, it delivers bright highs and detailed upper mids, while the 3 inch voice coil keeps heat under control for stable performance during long listening sessions.
Compact Design with Serious Performance Power
Powered by a compact neodymium motor, this driver keeps weight down while maintaining strong output, making it perfect for tight installs like door panels and custom builds. It handles up to 300 watts program power with ease, giving you reliable, distortion free sound. The front mount design makes installation simple, and the 2 inch bolt on exit ensures compatibility with a wide range of horn systems. With proper DSP tuning, you get clean, controlled output that fits perfectly into any high performance setup.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio D3220Ti-Nd sound quieter than my previous compression driver?
Lower output is often caused by incorrect amplifier gain, crossover settings, wiring polarity, or using a horn that is not properly matched to the driver.
- • Can the PRV Audio D3220Ti-Nd handle long hours of continuous playback?
Yes. When operated within its recommended power range and protected by the proper crossover settings, it is designed for reliable long term performance.
- • Why does my PRV Audio D3220Ti-Nd produce distorted highs at loud volume?
Distortion is commonly caused by amplifier clipping, excessive equalization, or sending frequencies below the recommended crossover point to the driver.
- • Does the PRV Audio D3220Ti-Nd need a compatible horn for proper performance?
Yes. A compatible horn is essential for achieving the intended sound coverage, efficiency, and frequency response of the compression driver.
- • Why is my PRV Audio D3220Ti-Nd making a humming or buzzing noise?
The noise may come from loose wiring, mounting hardware, horn vibration, electrical interference, or a damaged diaphragm. Inspecting the entire installation can help locate the source.
- • Can I replace only the diaphragm if my PRV Audio D3220Ti-Nd fails?
Yes. If the driver body is undamaged, replacing the diaphragm is often enough to restore normal operation and sound quality.
- • Is the PRV Audio D3220Ti-Nd suitable for active speaker systems?
Yes. It works well in active systems using a DSP, allowing precise control of crossover frequencies, equalization, and time alignment.
- • Why do vocals sound too thin through my PRV Audio D3220Ti-Nd?
Thin vocals are often caused by crossover settings that are too high, poor EQ adjustments, or improper blending with the midrange speakers.
- • Can I install the PRV Audio D3220Ti-Nd in an outdoor speaker cabinet?
Yes. It can be used in outdoor audio systems when installed in an enclosure that protects it from direct exposure to moisture, dust, and harsh weather.
- • How can I keep my PRV Audio D3220Ti-Nd performing at its best?
Use clean amplifier power, follow the recommended crossover settings, avoid amplifier clipping, inspect the horn and wiring regularly, and keep the driver protected from environmental damage for dependable long term operation.
- Diameter : 2 Inch
- RMS Power Range : 300 Watts
- Peak Power Handling : 600 Watts
Features:
- Ultra High Sensitivity Output: Produces 110 dB efficiency for strong and detailed high frequency projection in demanding systems.
- Neodymium Motor Compact Design: Utilizes a high strength magnet structure for reduced size and weight without compromising output.
- Titanium Diaphragm Precision: Ensures crisp and accurate high frequency reproduction with excellent durability.
- Wide Frequency Response Range: Covers 1,200 Hz to 19,000 Hz for extended highs and detailed upper midrange clarity.
- Large 3 Inch Voice Coil Structure: Provides stable thermal performance and supports high power operation.
- High Power Handling Capability: Handles up to 300 watts RMS program power for dynamic and distortion free playback.
- Front Mount Installation Ready: Designed for easy mounting without removing the driver from compatible horn systems.
- Bolt On 2 Inch Exit Configuration: Ensures compatibility with a wide range of professional and car audio horns.
- Optimized for Custom Installations: Ideal for door panels, stunt walls, and high output competition builds.
- DSP Ready Performance Tuning: Designed for use with recommended crossover settings to maintain clean and controlled output.
Specifications:
- Exit Throat Diameter: 2” (50 mm)
- Nominal Impedance: 8 Ohm
- Nominal Power Handling: 150 W
- Continuous Program Power (RMS): 300 W
- Max Peak Power: 600 W
- Sensitivity (2.83V @ 1m): 110 dB
- Recommended High-Pass Crossover: 1,400 Hz (12 dB per octave) for full power handling
- Frequency Response (-10 dB): 1,200 – 19,000 Hz
- Voice Coil Diameter: 3” (76.2 mm)
- Voice Coil Wire Material: CCAW (Copper-Clad Aluminum Wire)
- Voice Coil Former Material: Kapton
- Diaphragm Material: Titanium
- Flux Density: 1.80 T
- Magnet Material: Neodymium
- UPC: 810075522532
- Weight: 2
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
