PRV D3220Ph Series 2" 300W RMS (600W Peak Power Handling) 8 Ohm,Exit Ferrite Phenolic Compression Driver (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Strong Vocals That Stay Front and Center
The PRV Audio D3220Ph is built to make your vocals stand out no matter how loud your system gets. With 108 dB sensitivity, it delivers clear and powerful midrange projection that cuts through heavy bass with ease. Perfect for high output setups, this driver keeps your vocals sharp, present, and impossible to ignore.
Smooth Sound That Feels Natural at Any Volume
Designed with phenolic diaphragm technology, this driver produces a warm and natural midrange that stays smooth even when pushed hard. It covers 650 Hz to 7,500 Hz, giving you accurate vocal reproduction and strong midrange detail. The 3 inch voice coil helps manage heat efficiently, so you get stable, consistent performance during long play sessions without losing clarity.
Reliable Power for Everyday and Competition Use
Built with a compact ferrite motor, this driver offers dependable magnetic strength while keeping installation manageable. It supports up to 300 watts program power, making it ready for both daily listening and SPL builds. The front mount design simplifies installation, and the 2 inch bolt on exit ensures compatibility with a wide range of horn systems. With DSP optimized tuning, you get clean, controlled sound that fits perfectly into any serious car audio setup.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio D3220Ph sound muffled after installation?
Muffled sound is often caused by incorrect crossover settings, improper horn alignment, or equalizer adjustments that reduce high frequency output. Proper tuning usually restores clarity.
- • Can I connect the PRV Audio D3220Ph directly to my amplifier?
No. The compression driver should always be used with a passive crossover or a properly configured DSP to prevent damaging low frequencies from reaching the driver.
- • Why is my PRV Audio D3220Ph overheating during long listening sessions?
Excessive heat is typically caused by amplifier clipping, overpowering the driver, or operating below the recommended crossover frequency. Correct system tuning helps reduce stress on the driver.
- • Does the PRV Audio D3220Ph require a specific type of horn?
Yes. Using a horn that matches the driver's mounting specifications and acoustic characteristics helps achieve the best sound quality and coverage.
- • Why does my PRV Audio D3220Ph make a crackling sound during vocals?
Crackling is commonly caused by a damaged diaphragm, loose wiring, amplifier distortion, or poor electrical connections. Inspecting the complete system can help identify the issue.
- • Can I replace the diaphragm if my PRV Audio D3220Ph loses output?
Yes. If the compression driver housing is still in good condition, replacing the diaphragm is often enough to restore normal performance.
- • Is the PRV Audio D3220Ph suitable for custom stage speakers?
Yes. It is frequently used in professional stage monitors, PA speakers, and other high output systems where vocal clarity is essential.
- • Why do the high frequencies fade after playing music for a long time?
This can happen if the amplifier begins clipping, the system overheats, or the driver experiences thermal stress during extended high volume operation.
- • Can I use the PRV Audio D3220Ph in a fully active audio system?
Yes. It performs well with a DSP that provides accurate crossover control, equalization, and time alignment for improved system integration.
- • How can I keep my PRV Audio D3220Ph working reliably for years?
Use the recommended crossover settings, provide clean amplifier power, avoid excessive clipping, protect the driver from moisture and dust, and regularly inspect the horn, wiring, and mounting hardware.
- Diameter : 2 Inch
- RMS Power Range : 300 Watts
- Peak Power Handling : 600 Watts
Features:
- High Efficiency Vocal Output: Delivers 108 dB sensitivity for clear and powerful midrange projection in high output systems.
- Phenolic Diaphragm Technology: Provides natural and smooth vocal reproduction with excellent durability for continuous use.
- Optimized Midrange Frequency Response: Covers 650 Hz to 7,500 Hz for accurate and focused vocal reinforcement.
- Large 3 Inch Voice Coil Design: Ensures stable thermal performance and supports consistent high power handling.
- High Power Handling Capability: Supports up to 300 watts RMS program power for dynamic and reliable playback.
- Compact Ferrite Motor Structure: Maintains strong magnetic performance while keeping a manageable size for installations.
- Front Mount Installation Ready: Allows easy mounting without removing the driver from compatible shallow horn systems.
- Bolt On 2 Inch Exit Configuration: Ensures secure compatibility with a wide range of professional horn applications.
- Ideal for 3 Way System Integration: Designed for vocal reinforcement in custom car audio and SPL competition setups.
- DSP Optimized Performance: Works efficiently with recommended crossover settings for clean and controlled sound output.
Specifications:
- Exit Throat Diameter: 2” (50 mm)
- Nominal Impedance: 8 Ohm
- Nominal Power Handling: 150 W
- Continuous Program Power (RMS): 300 W
- Peak Power Handling: 600 W
- Sensitivity (2.83V @ 1m): 108 dB
- Recommended High-Pass Crossover: 800 Hz (12 dB per octave) for full power handling
- Frequency Response (-10 dB): 650 – 7,500 Hz
- Voice Coil Diameter: 3” (76 mm)
- Voice Coil Wire Material: CCAW (Copper-Clad Aluminum Wire)
- Voice Coil Former Material: Kapton
- Diaphragm Material: Phenolic
- Flux Density: 1.77 T
- Magnet Material: Ferrite
- UPC: 810075522075
- Weight: 2
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
