Orion X300D - XTR Series 3" 1200W Peak Power Handling at 8-Ohms Compression Driver
We are a Orion authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 3" 1200W Compression Driver
- • Owner's Manual
High Output, Precision Sound
Experience powerful, detailed highs with the Orion X300D, a 3” high-performance compression driver built for serious audio systems. With 300W RMS and 1200W max power at 8 ohms, it delivers strong projection and crystal-clear clarity. Perfect for competition and high-performance builds, it ensures your sound stands out loud and precise.
Advanced Build, Ultra-Clear Sound
Engineered with a 2.94” CCAR voice coil and polyimide diaphragm, the X300D delivers outstanding heat resistance, durability, and distortion-free performance. Its wide 0.5 kHz–18 kHz frequency range captures detailed highs with precision. With 110 dB sensitivity, it ensures efficient, powerful sound output at any listening level.
Heavy-Duty Power, Lasting Performance
Built with a robust 58 oz ceramic magnet, this compression driver delivers strong motor force for powerful, consistent sound. Its durable construction ensures reliable performance even in demanding pro car audio environments. Designed for serious setups, it provides long-lasting strength and stability you can trust.
Frequently Asked Questions (FAQ)
- • Why does the X300D produce less bass after changing the subwoofer?
Different subwoofers can have very different efficiency and impedance characteristics. One owner reported strong results with a 12-inch Image Dynamics sub at 1 ohm, showing how the driver and wiring combination can affect the result.
- • Can I safely run the X300D at a 1-ohm load?
Yes. Orion's specifications list 300 watts RMS at 1 ohm, so a correctly wired 1-ohm subwoofer load is within the amplifier's specified operating range.
- • Why does the amplifier shut down and then come back on later?
Cycling on and off can occur when thermal protection activates. Poor ventilation can make this more likely, particularly when the amplifier is installed in a confined location.
- • Why is the X300D showing power but producing no sound?
Check the remote turn-on signal, fuse, power and ground connections, RCA input, speaker wiring, and the subwoofer itself. Orion's amplifier troubleshooting documentation lists these as common causes of no output.
- • Why does my subwoofer become distorted when I turn the system up?
Excessive gain, an impedance load that is too low, or shorted speaker wiring can cause distorted output. Orion recommends correcting the gain and verifying the speaker load and wiring.
- • Why did the X300D stop working after the fuse blew?
A blown fuse can indicate a problem with the power wiring or a speaker short rather than simply a bad fuse. Inspect the wiring and speaker circuit before installing another fuse.
- • Does the X300D have enough power for a single 12-inch subwoofer?
Owners have successfully used the amplifier with 12-inch subwoofers. One reviewer reported running a 12-inch Image Dynamics ID12 at 1 ohm for about a year, while another used a Memphis M3 12-inch in a ported enclosure.
- • Why does the bass response change when I adjust the amplifier controls?
The X300D is a mono subwoofer amplifier with a 20Hz–200Hz frequency range, so crossover and level adjustments directly affect which frequencies reach the subwoofer. Incorrect crossover settings can produce poor bass response.
- • Why does the X300D seem surprisingly powerful for its small size?
Several owners specifically commented that the compact amplifier produced more output than they expected. One reviewer said it delivered approximately 340W at 1 ohm in their installation, while Orion's published specification lists 300W RMS at 1 ohm.
- • What should I check if the X300D works intermittently while driving?
Inspect the ground, power terminals, RCA connections, remote turn-on wire, and speaker connections for looseness. Orion's troubleshooting guidance identifies loose power or audio connections as possible causes of intermittent amplifier operation.
- Diameter : 3 Inch
- RMS Power Range : 300 Watts
- Peak Power Handling : 1200 Watts
Features:
- ORION HIGH PERFORMANCE COMPRESSION DRIVER: The Orion X300D is a professional-grade 3” compression driver engineered for high-output car audio systems, delivering precise and powerful high-frequency reproduction.
- BIG POWER HANDLING: Rated at 300W RMS and 1200W Max Power at 8 ohms, this compression driver provides the projection and clarity required for competition-level and high-performance audio builds.
- ADVANCED MATERIALS: Constructed with a 2.94” CCAR voice coil and a polyimide diaphragm, the X300D offers excellent heat resistance, durability, and distortion-free sound reproduction under high output.
- WIDE FREQUENCY RESPONSE: With a frequency range of 0.5kHz – 18kHz and a high 110 dB sensitivity, this driver delivers efficient sound output with accurate detail at all listening levels.
- DURABLE CERAMIC MAGNET STRUCTURE: Built with a robust 58 oz ceramic magnet, providing strong motor force and reliable long-term performance in demanding pro car audio applications.
Specifications:
- Mounting Type: Flush Mount
- Speaker Type: Driver
- Speaker Max Output: 1200W
- Brand: ORION
- Connectivity Technology: Coaxial
- UPC: 818550014893
- Weight: 8
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
