Wet Sounds HTX-1 Hydro-Tech X (HTX) Series 650W RMS x 1 at 2 Ohms, Full Range Class-D Mono Subwoofer Marine Amplifier
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Hydro-Tech X (HTX) Series Full Range Class-D Mono Subwoofer Marine Amplifier
- • (2) 30A ATO fuses (installed)
- • 20' Flat remote cable (RJ-25 plugs at both ends)
- • 2.5mm Allen wrench
- • Remote level control module
- • Owner's Manual
Why Choose Wet Sounds HTX-1 Marine Amplifier?
Powerhouse Monoblock Amplifier
The Wet Sounds HTX-1 is a powerhouse monoblock amplifier designed to deliver exceptional audio performance in marine and outdoor environments. With an RMS power output of 650 watts at 2 ohms, this amplifier is capable of driving your subwoofer or speaker system with impressive clarity and depth.
Harshest Conditions
Built to withstand the harshest conditions, the HTX-1 features a rugged and durable construction. Its conformal-coated PCB (Printed Circuit Board) ensures protection against moisture, salt, and other environmental elements, making it perfect for marine applications. Additionally, the amplifier incorporates advanced thermal management technology, preventing overheating and ensuring reliable performance.
Versatile Connectivity Options
The HTX-1 offers versatile connectivity options, including RCA inputs, speaker-level inputs, and remote-level control. It features a variable low-pass filter and subsonic filter, allowing you to fine-tune the sound and optimize the performance of your audio system.
Sleek Design and Compact Footprint
With its sleek design and compact footprint, the HTX-1 can be easily integrated into various marine and outdoor installations. It provides exceptional power and efficiency, delivering clean and powerful bass for an immersive audio experience.
Frequently Asked Questions (FAQ)
- • Why won't the amplifier turn on?
Check the fuse, ground, remote wire, power connection, and battery voltage. The amplifier requires proper 12-volt power and grounding before operating normally.
- • Why is the indicator flashing red?
A flashing red indicator means protection mode. Check for speaker shorts, damaged speakers, incorrect voltage, overheating, or loose wiring touching the amplifier.
- • Why does the amplifier shut down after playing for a while?
Insufficient airflow or excessive output can cause thermal protection. Improve ventilation around the amplifier and reduce the system level if shutdown continues.
- • Why is the subwoofer output weaker than expected?
Check the gain, low-pass crossover, subsonic filter, and speaker wiring. Incorrect settings or reversed polarity can reduce bass output and limit subwoofer performance.
- • Why does the amplifier get unusually hot?
Some heat is normal, but excessive temperature can indicate poor ventilation, overdriving, or an incorrect speaker load. Provide adequate airflow and verify the wiring.
- • Why does the subwoofer sound distorted?
Check the gain and bass boost settings before increasing volume. Excessive gain or bass boost can cause clipping and distortion when heavily driven.
- • Why does the amplifier keep blowing its fuse?
Check for shorted speaker wires, incorrect wiring, damaged components, or electrical problems. Replace the fuse only with the correct rating and inspect the system first.
- • Can I use a 2-ohm subwoofer with this amplifier?
Yes. It is rated for 650 watts RMS at 2 ohms. Confirm the subwoofer's final impedance and wiring before installation to ensure the intended load.
- • Why does the bass disappear at certain volume levels?
Check speaker polarity, crossover settings, and gain adjustment. Phase cancellation or incorrect filtering can reduce bass response, so verify connections and retune carefully.
- • Why is there no sound even though the amplifier powers on?
Check the RCA signal connection, speaker wiring, gain setting, and source output. Confirm the amplifier shows a solid blue indicator and the subwoofer is functioning.
- Low Frequency Response : 50-150 Hz
- Number of Channels : 1
- Frequency Response : 10-150 Hz
- Built In Crossovers : Yes
- RMS Power Output : 1x650 Watts
- Color : Silver
- Amplifier Class : D
- Promo : Yes
Features:
- Optimized Performance Circuitry: Equipped with class-D power supplies.
- Extreme Power Output: Delivers exceptional power in a compact chassis.
- Thermal Overload Protection: Ensures safe operation even under high temperatures.
- Flexible Crossovers and Extended Inputs: Offers versatile connectivity options.
- High-Mass Heat Sink: Provides efficient heat dissipation.
- Smart Microprocessor: Enhances electronic performance.
- Extensive CrossOver Network Support: Compatible with Wet Sounds’ comprehensive CrossOver network.
Specifications:
- Mono marine amplifier
- Class-D design
- 330 watts RMS x 1 at 4 ohms (650 watts RMS x 1 at 2 ohms)
- Variable low-pass filter
- Bass boost (0-12dB)
- 1 pair preamp outputs
- Rugged, water-resistant shell
- Removable speaker terminal blocks for easier installation
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- Fuse rating: 60A x 2
- Frequency response: 10-150 Hz
- Dimensions: 9-9/16"W x 3-1/8"H x 7-3/16"D
- UPC: 814820022209
- Weight: 6
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
