Pioneer TS-A3000LB A-Series 12" 400W RMS (1500W Peak Power Handling) Single 2 Ohms Voice Coil Shallow Mount Pre-Loaded Enclosure Subwoofer
We are a Pioneer authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" A-Series Pre-Loaded Enclosure Subwoofer
- • Owner's Manual
Why Choose Pioneer TS-A3000LB Enclosed Car Subwoofer?
Big Bass Energy Built Into One Clean Package
The Pioneer TS-A3000LB is all about bringing serious low-end power in a clean, ready-to-install setup. This factory-tuned sealed 12-inch enclosure delivers tight, controlled bass that stays accurate even when you push it hard. It is built for people who want deep bass without the boominess or distortion, giving your music a solid foundation that feels powerful but still clean and controlled.
Serious Driver Engineering for Real Bass Performance
Inside, you get a 12-inch composite IMPP cone reinforced with glass fiber and mica, giving you a strong but lightweight structure that reacts fast and hits deep. The precision motor and suspension system keep everything moving smoothly even under heavy bass demand, so you do not get sloppy sound when the volume climbs. It stays controlled, linear, and consistent no matter how hard you push it.
Flexible Fit for Almost Any Vehicle Setup
This enclosure is designed to work in real cars, not just perfect demo setups. Its low-profile design makes it easy to fit in trucks, under seats, or tight trunk spaces without losing output. You also get multiple mounting options, so you can run it upright, flat, or even down-firing depending on how your vehicle is set up and how you want the bass to hit inside the cabin.
Powerful, Reliable, and Built to Install Clean
With 400 watts RMS and up to 1500 watts peak power handling, the TS-A3000LB has no problem keeping up with serious aftermarket systems. The 2-ohm design gives you flexible amplifier matching, while the reinforced carpeted enclosure and included mounting hardware keep everything secure and stable. It is the kind of subwoofer that installs clean, plays hard, and keeps performing every time you turn it on.
Frequently Asked Questions (FAQ)
- • Why does it produce very little bass after installation?
Weak bass is often caused by incorrect amplifier gain, reversed speaker polarity, or improper crossover settings. Double-check the wiring and tune the amplifier according to the recommended specifications.
- • Does this enclosure require any assembly before installation?
No. The subwoofer is already mounted inside a factory-designed enclosure, making installation much simpler.
- • Can I use this enclosure with my factory stereo?
Yes. You'll need a compatible amplifier, and many factory audio systems also require a line output converter for proper integration.
- • Why does the bass sound distorted at higher listening levels?
Amplifier clipping or excessive gain settings are the most common causes of distortion. Lower the gain and adjust the low-pass crossover to achieve cleaner bass output.
- • Why does the enclosure move around in the trunk while driving?
Hard acceleration, braking, and strong bass can cause an unsecured enclosure to slide. Secure it with straps, brackets, or a non-slip cargo mat to prevent movement.
- • Should I let the subwoofer break in before using maximum volume?
Yes. Playing music at moderate volume for several hours helps the suspension loosen naturally and promotes optimal long-term performance.
- • Why do I hear rattling from the rear of my vehicle during bass-heavy songs?
Strong bass can cause loose license plates, interior trim, and cargo to vibrate. Securing loose components and adding sound-deadening material usually minimizes unwanted rattles.
- • Why doesn't the bass blend smoothly with my factory speakers?
An incorrect crossover frequency or phase setting can create gaps between the subwoofer and door speakers. Proper tuning helps deliver a seamless transition across the audio range.
- • Can I use a more powerful amplifier with this enclosed subwoofer?
Yes, provided the amplifier's RMS output and impedance match the enclosure's recommended specifications. Using excessive power without proper tuning can damage the subwoofer over time.
- Diameter : 12 Inch
- Sensitivity : 88 dB
- Frequency Response : 20-1000 Hz
- Peak Power Handling : 1500 Watts
- Number Of Subwoofers : 1
- Enclosure Type : Sealed
- Amplified : No
- RMS Power Handling : 400 Watts
Features:
- Factory-Tuned Sealed Bass System: Comes as a fully pre-loaded 12-inch sealed enclosure, engineered to deliver controlled low-frequency output with strong accuracy and reduced acoustic distortion.
- A-Series Sound Integration Design: Built to complement Pioneer A-Series speaker systems, ensuring cohesive tonal balance and smooth transition between mids, highs, and deep bass response.
- Advanced 12-Inch Composite Cone Driver: Features an IMPP cone reinforced with glass fiber and mica for improved stiffness-to-weight ratio, enabling fast response and deep bass reproduction with precision control.
- Precision Suspension and Motor Architecture: Designed for stable cone movement across high excursion conditions, maintaining linear performance and minimizing unwanted resonance during heavy bass output.
- Space-Efficient Low-Profile Build: Engineered with a shallow enclosure profile to maximize installation flexibility in compact areas such as truck cabins, under-seat spaces, and tight trunk layouts.
- Multi-Position Installation Capability: Supports various mounting orientations including upright, horizontal, and inverted down-firing configurations for customized bass direction and cabin tuning.
- High Output Power Capability: Rated for 400 watts RMS and up to 1500 watts peak handling, delivering strong bass performance suitable for demanding aftermarket audio setups.
- Extended Low-Frequency Response Range: Covers deep bass reproduction from 20Hz up to 1kHz, offering both sub-bass depth and smooth upper bass transition for fuller sound presence.
- Efficient 2-Ohm Single Voice Coil System: Optimized for amplifier compatibility and efficient power transfer, allowing flexible system integration and tuning options.
- Reinforced Enclosure Construction with Mounting Kit: Wrapped in durable acoustic carpet with included brackets and screw-on feet for secure installation stability and vibration resistance in real-world driving conditions.
Specifications:
- System Type: Pre-Loaded
- Sensitivity (1W/1m): 88dB
- Frequency Range: 20 Hz to 1 kHz
- CTA-2031 Compliant: Yes
- Continuous Power handling (RMS) - Watts: 400 Watts
- Maximum Peak Power Handling - Watts: 1500 Watts
- Nominal Impedance - OHM: 2
- Speaker Grill: Fully Covered Steel Mesh Grille
- Shape: Round
- Size: 12"
- Cone Material: IMPP - Composite
- Center Cap Material: ABS
- Surround Material: Rubber
- Surround Type: Rolled
- Basket Material: Stamped Metal
- Magnet Material: Ferrite
- Magnet Weight: 71.6 oz
- Voice Coil Type: Single Voice
- Voice Coil Bobbin: Glass Imide
- Voice Coil wire: Copper
- Damper: Poly cotton
- UPC: 884938446655
- Weight: 18
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
