Alpine SS-SB10 S-Series 10" 300W RMS (600W Peak Power Handling) 2 Ohms, Shallow Sealed Downward-Firing Preloaded Subwoofer Enclosure
We are a Alpine authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Subwoofer enclosure loaded with one 12" S-Series subwoofer
- • (4) Mounting brackets
- • (4) Foam pads with adhesive backing
- • (8) 3/4" screws
- • (4) M5x12mm machine screws
- • (4) Lock-washers
- • Product registration information
- • Warranty information
- • Installation manual (Eng/Fren)
- • Safety notice
- • Owner's Manual
Why Choose Alpine SS-SB10 Enclosed Car Subwoofer?
Alpine 10" S-Series Shallow Preloaded Subwoofer
Now you don’t have to choose between bass and space! This 10” S-Series Shallow Preloaded Subwoofer Enclosure measures just 4.5” deep, delivering clean, powerful, and reliable bass while fitting seamlessly into most vehicle applications.
Powerful and Compact Performance
The SS-SB10 packs a 2” voice coil and a lightweight neodymium magnet, delivering up to 300W RMS of clean, punchy bass. Its front-mounted magnet motor allows for an extremely shallow enclosure, giving you big bass in a compact footprint.
Next-Level Bass Control
Alpine’s Gen2 DD-Linear Magnetic Circuit uses a compact dual-gap voice coil for superior motor control, delivering 22mm peak-to-peak linear excursion for powerful, distortion-free output. With dual voice coils wired in parallel (2 Ohm load), the S-Series 10" Shallow Subwoofer Enclosure is optimized to perform perfectly with Alpine S2-A55V, KTA-200M, or KTA-30MW amplifiers.
Frequently Asked Questions (FAQ)
- • Is this enclosed subwoofer a good choice for a daily driver?
Yes, it is designed to deliver clean, impactful bass without sacrificing too much cargo space. It performs well across many music genres for everyday listening.
- • Will it work with my existing aftermarket amplifier?
It will work as long as the amplifier's RMS power and impedance match the subwoofer's specifications. Matching the components correctly helps ensure reliable performance.
- • Why doesn't the bass hit as hard as I expected?
Incorrect gain settings, crossover adjustments, or enclosure placement can reduce bass output. Proper tuning and positioning usually produce much stronger results.
- • Can I add this to my factory stereo without replacing it?
Yes, many factory systems can support an aftermarket subwoofer using a compatible amplifier and integration device. This lets you upgrade bass while keeping the original head unit.
- • Why does the amplifier go into protection mode during heavy bass?
This is commonly caused by overheating, poor wiring, or an incorrect speaker load. Inspect the wiring and verify that the amplifier is matched correctly to the subwoofer.
- • Can I place the enclosure facing either the rear seats or the trunk lid?
Yes, different orientations can change how bass is distributed throughout the vehicle. Experimenting with placement helps you find the best sound for your car.
- • Does the subwoofer sound better after a break-in period?
Yes, many users notice smoother bass after several hours of moderate listening. The suspension becomes more flexible as it breaks in naturally.
- • Why do my interior panels rattle when the bass plays?
Powerful low frequencies can cause loose trim pieces and panels to vibrate. Applying sound-deadening material and securing loose parts will reduce unwanted noise.
- • Can I remove the enclosure when I need more trunk space?
Yes, the enclosure can be disconnected and removed temporarily if additional cargo room is needed. Reconnect the wiring carefully when reinstalling it.
- • How can I make the bass blend better with my door speakers?
Adjust the crossover frequency and amplifier gain until the bass integrates smoothly with the rest of your system. Proper tuning creates a more balanced and natural listening experience.
- Diameter : 10 Inch
- Impedance : 2 Ohm
- Frequency Response : 32–200 Hz
- Peak Power Handling : 600 Watts
- Number Of Subwoofers : 1
- Enclosure Type : Sealed
- Color : Black
- RMS Power Handling : 300 Watts
Features:
- Preloaded 10” S-Shallow Subwoofer: Comes installed in a sealed, compact enclosure for easy, space-saving installation.
- Optimal Sealed Cabinet Quality: Rugged polymer enclosure ensures durability while delivering tight and accurate bass response.
- Neodymium Magnet: Lightweight yet powerful magnet for efficient cone movement and strong bass output.
- Front-Mounted Neodymium Motor: Maximizes magnetic flux for improved cone control and lower distortion.
- Alpine Gen2 DD Linear Magnetic Circuit: Ensures consistent linear motion for precise bass reproduction.
- Adjustable, Foam-Padded Mounting Brackets: Allows flexible installation and reduces vibration transfer to the vehicle.
Specifications:
- Woofer Size: 10 inches
- Speakers Per Box: 1
- Woofer Material: Polypropylene
- Enclosure Type: Sealed
- Color: Black
- Pieces in System: 1
- Width: 18-11/16 inches
- Height: 4-3/8 inches
- Depth: 12-1/2 inches
- Connector Type: Spring post, 12 AWG
- Frequency Response: 35-200 Hz
- Power Handling (RMS): 300 watts
- Power Handling (Peak): 600 watts
- Sensitivity: 85 dB at 1?W/1?m
- Impedance: 2 ohms
- UPC: 793276084477
- Weight: 14
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
Love how the subwoofer works. The shallow design makes it easy to install below seats and it does not take too much space compared to a typical sub enclosure. The lows are just right and theyre punchy.
