PRV Audio 6BUNDLE BULLET 1080W RMS Pro Audio Speaker Package with Two 6MR420-4 6.5" Bullet Midrange Car Speakers + Two TW500Ti-4 3.80" Shallow Super Car Tweeters
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 6.5" MR Bullet Series Midrange Car Speakers
- • (2) 4" Car Tweeters
- • Owner's Manual
Why Choose PRV Audio 6BUNDLE BULLET 1080W RMS Pro Audio Speaker Package
Premium 2-Way Audio Set
This complete audio bundle features 2x 6.5″ midrange drivers and 2x TW500Ti-4 super tweeters, delivering a wide frequency range of 145–20,000 Hz for full mid-to-high coverage. With a total power handling of 1080 Watts RMS—420 W RMS for mids and 120 W RMS per tweeter—this set ensures dynamic, distortion-free performance for your custom audio setup.
High-Performance 6.5″ Midrange Speaker
Designed for high-output car audio and custom door systems, this 6.5″ driver features a 4 Ohm impedance for efficient power handling. The aluminum bullet phase plug acts as a radiator to cool the voice coil and ensures even sound distribution, while the lightweight, high-damping fiber-pressed paper cone with M-roll cloth surround delivers smooth, accurate midrange response.
High-Performance Compact Super Tweeter
This 3.80″ super tweeter offers wide dispersion and easy installation in tight spaces. With a built-in capacitor for crossover and low-frequency attenuation, it delivers clear, powerful highs without straining your amplifier. Its robust stamped steel frame ensures durability and long-term reliability in pro audio and custom car systems.
PRV Audio 6BUNDLE BULLET Amplifier Guide | 1080W RMS Bullet Midrange & Super Tweeter Setup
The PRV Audio 6BUNDLE BULLET (1080 Watts RMS) combines high-output 6.5” bullet midrange speakers with shallow super tweeters for loud, clean pro audio performance. Proper amplifier matching and crossover tuning are critical to achieve maximum output, clarity, and reliability.
Recommended 2200W RMS High-Performance Amplifier Setup
For maximum loudness and full system control, PRV recommends a dual-amplifier configuration using two 6BUNDLE BULLET kits:
Recommended DSP Crossover Settings
- Midrange: 135 Hz HPF @ 18 dB/oct (BT18)
- Tweeters: 7000 Hz HPF @ 18 dB/oct (LR18)
Alternative QS800.4 Setup
Use QS800.4 for simple installs: 1 midrange + 1 tweeter per channel at 2 ohms.
Final Recommendation
MDX1800.1 + QS400.4 delivers maximum output and clarity. QS800.4 is best for simple daily setups.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 6BUNDLE BULLET sound distorted at high volume?
This is usually caused by amplifier clipping or incorrect tuning. The 6MR420-4 midrange should always be high-passed at 135 Hz (18 dB/octave), and the gain must be properly set. Distortion typically happens when the system is overdriven or played full-range without DSP protection.
- • Can I run the midrange speakers and tweeters on the same channel?
Yes, but it is not recommended for high-power setups. When wired together, power is shared and output is limited. In this configuration, you should use a 100 Hz high-pass filter (12 dB/octave) and limit power to around 200W RMS per channel to avoid distortion or damage.
- • Why are my TW500Ti-4 tweeters sounding harsh or blowing?
This is commonly caused by incorrect crossover settings or lack of proper high-pass filtering. The TW500Ti-4 must be set at 7000 Hz (18 dB/octave). Running them below this range or without a DSP can cause harsh sound and premature failure.
- • Why is my system not loud even with a big amplifier?
Low output is usually caused by poor gain tuning, incorrect impedance wiring, or lack of DSP tuning. The 6BUNDLE BULLET requires clean, unclipped power and proper crossover control to reach full output potential.
- • What amplifier is recommended for the PRV Audio 6BUNDLE BULLET?
For maximum performance, use a PRV MDX1800.1 for the midrange speakers and a QS400.4 for the tweeters. For simpler installs, the QS800.4 allows one midrange and one tweeter per channel.
- • Why do my speakers burn out quickly?
Most failures are caused by amplifier clipping, not RMS rating. When the amplifier is distorted, it sends a clipped signal that overheats voice coils. Proper gain setting and DSP protection are critical.
- • Can I install the PRV 6BUNDLE BULLET without a DSP?
Yes, but it is not recommended for high-output builds. A DSP ensures accurate crossover control, better sound clarity, and protects both midrange speakers and tweeters from damage at high volume.
- • What causes weak bass or midrange output in this system?
Weak output is often caused by incorrect filtering, underpowered amplification, or improper wiring configuration. The system performs best when each component receives clean, dedicated power with proper tuning.
- • Can I wire multiple 6BUNDLE BULLET kits together?
Yes, but impedance must be carefully calculated. Two kits are typically used for 2200W RMS setups, with midranges wired in parallel to 1 Ohm and tweeters assigned per channel for balanced output.
- • Is the PRV Audio 6BUNDLE BULLET good for daily driving?
Yes. When properly tuned, it delivers loud, clear, and efficient sound suitable for daily use. It is also capable of competition-level output when paired with the correct amplifier and DSP setup.
- Diameter : 6.5 Inch
- Sensitivity : 95 dB
- Frequency Response : 125-12500 Hz
- Peak Power Handling : 840 Watts
- RMS Power Handling : 420 Watts
Features:
- Complete Audio Bundle: Includes 2x 6.5″ mids and 2x TW500Ti-4 super tweeters
- Wide Frequency Range: 145 – 20,000 Hz for full mid-to-high coverage
- High Power Handling: 1080 Watts RMS total – mids 420 W RMS, tweeters 120 W RMS each
- 4 Ohm Impedance: Ideal for high-output car audio or custom door systems
- Aluminum Bullet Phase Plug: Acts as a radiator to cool the voice coil and ensures even sound distribution
- Lightweight, High-Damping Cone: Optimized fiber pressed paper cone with M-roll cloth surround for smooth response
- Super Tweeter Design: 3.80″ faceplate for easy installation, wide dispersion, built-in capacitor for crossover and low-frequency attenuation
- High Output at Low Power: Midrange drivers provide strong vocal and midbass performance without overdriving the amp
- Durable Construction: Stamped steel frame with optimized design for pro audio longevity
Specifications:
- Nominal Diameter: 6″ (152 mm)
- Nominal Impedance: 4 Ohm
- Nominal Power Handling: 210 Watts
- Continuous Program Power (RMS): 420 Watts
- Max Peak Power: 840 Watts
- Sensitivity (2.83V @ 1m): 95 dB
- Frequency Response: 125 – 12,500 Hz
- Voice Coil Diameter: 1.5″ (38 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 8.5 mm
- Former Material: Kapton
- Magnetic Gap Depth: 6.0 mm
- Frame Material: Stamped Steel
- Recommended Hi-Pass Crossover: 145 Hz, 12 dB/octave
- UPC: 810075527223
- Weight: 12.85
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.