Alpine S2-S65 Next Gen S-Series 6.5" 80W RMS (240W Peak Power Handling) 4 Ohms, 2-Way Coaxial Car Speakers (Pair)
We are a Alpine authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 2-way speakers
- • (2) Adapter rings
- • (2) 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
- • (8) 1-1/8" Screws
- • (8) M4 Nuts
- • (6) Flat washers
- • (8) Speed clips
- • Warranty information
- • On-line product registration information
- • Important Notice sheet
- • Declaration of conformity
- • Template and specs on box
- • Owner's Manual
Why Choose Alpine S2-S65 Coaxial Car Speakers
Best 6.5-Inch Coaxial Speakers for Hi-Res Audio, Clear Sound & Strong Bass
The Alpine S2-S65 is one of the best 6.5-inch coaxial speakers for a clean car speaker upgrade with high-performance car speakers clarity. Certified by JAS Hi-Res Audio, it delivers wide frequency response, detailed sound reproduction, and very low distortion car speakers performance. The result is a neutral sound profile with crisp highs, smooth mids, and balanced bass for everyday driving.
Bass-Focused Car Speakers with Strong Midbass & Clean Output
Built as bass-focused car speakers, the S2-S65 uses HAMR surround technology for better cone movement and stronger bass. This gives car speakers with strong bass response while keeping sound clean and controlled. It also works as high-output car audio speakers, delivering crisp and accurate sound speakers with solid midbass and smooth highs.
High-Output Car Speakers for Factory or Amplifier Upgrades
Rated at 80W RMS, the S2-S65 works well in factory systems or with amplifiers. These high-output car audio speakers stay clear at higher volume and deliver stable performance. Perfect for a speaker upgrade from factory audio, they offer detailed sound reproduction, strong output, and long-term reliability.
Popular Alpine 6.5" Coaxial Speaker Comparisons
| Ultimate Alpine 6.5" Coaxial Speaker Performance Comparison |
Alpine S2-S65
Next Gen S-Series 6.5" Coaxial Speaker – Balanced OEM+ Upgrade with Clean Clarity & Controlled Bass
BEST VALUE
- • (2) 6.5" Coaxial Speakers
- • 240W Peak Power / 80W RMS
- • Balanced sound tuning
- • Clear vocals + controlled midbass
- • OEM upgrade friendly
|
Alpine BRV-S65
BassRev Series 6.5" Coaxial Speaker – Enhanced Midbass Punch & Loud Output Tuning
BASS FOCUSED
- • (2) 6.5" Coaxial Speakers
- • Bass-forward tuning design
- • Strong midbass impact
- • High output for loud systems
- • Optimized for performance installs
|
Alpine R2-S65
Next-Gen R-Series 6.5" Coaxial Speaker – 300W Peak Power High-Output Performance System
HIGH PERFORMANCE
- • (2) 6.5" Coaxial Speakers
- • 300W Peak Power / 100W RMS
- • High-output R-Series design
- • Strong midbass + clarity
- • Premium build materials
|
Alpine HDZ-65
Premium Hi-Res Coaxial Speaker – Ultra-Clear Sound for Audiophile-Level Builds
PREMIUM PICK
- • (2) 6.5" Hi-Res Coaxial Speakers
- • Ultra-detailed sound reproduction
- • Audiophile-grade clarity
- • Smooth high-frequency response
- • Premium Alpine build quality
|
Alpine S2-S65 Recommended Amplifiers | Best 4-Channel Amp Pairing for Clean Power & High-Output Performance
Alpine S2-S65 Amplifier Matching Guide
Best 4-Channel Amplifiers for Clean Power, Strong Midbass Control & Distortion-Free Sound Quality
Amplifier Matching Overview
S2-S65 Power Rating: 80W RMS per speaker
Ideal Amp Range: 50W – 80W RMS per channel @ 4Ω
Goal: Clean headroom, strong clarity, controlled midbass
Best Setup: 4-channel amplifier for front stage upgrade or full system build
Top Recommended Amplifiers for Alpine S2-S65
Alpine S2-A36F: Best match for S-Series speakers – clean Alpine synergy, smooth output, and safe power delivery for daily listening.
JL Audio JD400/4: Best value high-performance option – efficient power delivery with clean sound and strong reliability.
JL Audio RD400/4: Best sound quality upgrade – ultra-clean output with excellent detail, imaging, and low distortion.
Rockford Fosgate R2-500X4: Best high-headroom amplifier – strong dynamic output for users wanting louder, more powerful system performance.
Gain & Tuning Recommendations
Gain Setting: Set using clean signal method to avoid clipping and distortion
HPF Setting: 80Hz – 100Hz for tighter midbass and speaker protection
EQ Settings: Start flat, then adjust based on vehicle acoustics
Balance: Front-focused tuning improves imaging and soundstage
Important: Avoid heavy bass boost—use proper amplification instead
Pro Tip: The Alpine S2-S65 performs best when paired with a clean 4-channel amplifier delivering 50W–80W RMS per channel. Underrated amps are safe, but a properly matched amplifier dramatically improves clarity, midbass punch, and overall sound quality.
Frequently Asked Questions (FAQ) – Alpine S2-S65 Coaxial Speakers
• Why do my Alpine S2-S65 speakers have weak bass after installation?
This is one of the most common real user complaints. Many buyers expect deep bass from a 6.5-inch coaxial speaker, but weak bass is usually caused by factory head unit power, poor door sealing, incorrect polarity, or no tuning. Adding an amplifier, proper DSP tuning, and sound deadening usually improves bass significantly.
• Do Alpine S2-S65 speakers need an amplifier to sound good?
They will work on a factory radio, but real users often report that they sound “flat” or underpowered without an amplifier. A clean 4-channel amp improves volume, midbass punch, and overall clarity.
• Why do my S2-S65 speakers distort at high volume?
Distortion is usually caused by amplifier clipping, incorrect gain settings, EQ bass boost, or sending too much low-frequency bass. Setting a proper high-pass filter (around 70Hz–90Hz) helps prevent distortion and protects the speakers.
• Are Alpine S2-S65 speakers good for bass?
They offer solid midbass compared to factory speakers, but they are not designed for deep sub-bass. Most users pair them with a subwoofer for full low-end performance.
• Why do my S2-S65 speakers sound too bright or sharp?
Some users report that the highs can sound sharp depending on the vehicle and tuning. This is usually fixed by adjusting treble levels, reducing EQ peaks, or using DSP tuning for smoother response.
• What amplifier works best with Alpine S2-S65 speakers?
Most users get the best results with 50–75W RMS per channel at 4 ohms. This provides clean headroom and improves clarity without pushing the speakers into distortion.
• Why do my S2-S65 speakers sound muddy or unclear?
Muddy sound is commonly linked to poor door acoustics, phase issues, incorrect polarity, or lack of tuning. Real-world users often fix this with proper wiring checks and basic DSP/EQ adjustments.
• Do I need sound deadening for Alpine S2-S65 speakers?
Not required, but highly recommended. Many users notice better midbass response, reduced vibration, and clearer sound when doors are treated with sound-deadening material.
• Why do my left and right speakers sound different?
This is often caused by polarity reversal, balance/fade settings, or installation differences between doors. Checking wiring and ensuring both sides are installed correctly usually solves the issue.
• Are Alpine S2-S65 speakers worth upgrading to?
Yes. Real users consistently report improved clarity, better midbass, louder output, and overall better sound quality compared to factory speakers—especially when paired with an amplifier.
Alpine S2-S65 Videos & Reviews
← Swipe left or right to browse videos →
- Diameter : 6.5 Inch
- Sensitivity : 88 dB
- Frequency Response : 55-40000 Hz
- Peak Power Handling : 240 Watts
- Design : 2 Way
- RMS Power Handling : 80 Watts
Features:
- High-Resolution Sound: Hi-Res Audio Certified by the Japan Audio Society (JAS) with ultra-wide 55–40,000 Hz frequency response, revealing every layer of your high-quality music files.
- Advanced Woofer Construction: Lightweight polypropylene, glass fiber, and mica cone provides accurate sound with low distortion, ensuring crisp mids and powerful bass.
- HAMR Surround Technology: High Amplitude Multi-Roll surround design maximizes cone movement for deeper, cleaner bass and enhanced durability over time.
- Detailed Highs: 1" cloth dome tweeter delivers smooth, natural treble for a more lifelike and balanced listening experience.
- Strong Performance: Handles up to 80W RMS (240W peak), ideal for aftermarket or factory power setups, ensuring clear, consistent sound even at high volumes.
Specifications:
- Speaker Type: 2-Way Coaxial
- Woofer Size: 6-1/2"
- Woofer Material: Polypropylene/Glass Fiber/Mica
- Tweeter Size: 1" Cloth Dome
- Surround: Specialized Rubber (HAMR)
- Frequency Response: 55–40,000 Hz
- Power Handling (RMS): 80 W
- Peak Power Handling: 240 W
- Sensitivity: 88 dB
- Impedance: 4 Ohms
- Mounting Depth: 2.282"
- Grilles: Not Included
- Certification: Hi-Res Audio Certified
- UPC: 793276085047
- Weight: 6.34
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
Who says this ain't a good speaker? It's awesome and a great deal! Fits just right in my Colorado.
-
Lovely speakers! Adds a new flavor to my sound system setup. My Forester now sounds amazing and I can listen to my music without that muddy sound. These are better version 6.5s
-
Works like a charm. Crystal clear sound
-
I love the loud, clear quality these speakers deliver. They are a huge upgrade over the stock ones in my Land Cruiser! Paired with my old Alpine S-A32F, and they sound incredibly crisp and clear. Amazing value for the money!
-
so much clarity with the speakers. loud and i can hear some bass. really much better than the stock speakers in my bronco
